In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks which you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the home, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup http://kowel.co.kr/2021/04/09/finding-the-best-cheap-dog-food/ that will look a little scary at first, but it’s really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak when you put the mask on. Make sure the edges are cut so the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask , so that you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so you don’t wind up with smudges or smears on your dog.
Then it’s time to paste the mask onto your dog’s head. First you need to make sure that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it is secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don’t make the folds too large or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Be sure the ears are level and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll have to do some sanding to make sure that it’s safe on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.